construction supplies

One of the most critical components in any type of building is the foundation. Without a strong foundation the rest of the building will be less likely to remain sturdy and without serious issues. When beginning construction on a building one of the first steps will be in laying concrete to create the structures foundation.

After land has been properly graded, the next step usually involves concrete form work. This is done so the concrete for the foundation can be poured and set properly. From work generally requires a good deal of supplies from a company, like A.H. Harris Construction Supplies. Not only will they be able to provide the lumber needed for the creation of the forms but also the various types of construction supplies needed in the process.

Forms are generally created out of lumber. A form must be measured and laid out exactly as the plans indicate so it will be able to pass inspection. Once the forms are put in place the concrete can be poured into the forms to create the foundation.

Pouring concrete is often a difficult task. Generally, it requires a number of workers who must work quickly to spread the concrete throughout the form. Most contractors hire a supplier to bring the concrete in a truck, which can keep the cement from setting by continually mixing it. Trucks generally drive onto the job site and then pour the concrete down a chute and into an area of the form.

Once the concrete is poured, workers must then use shovels, rakes and other tools to move the concrete throughout the form in a smooth and even manner. This can be very labor-intensive work and it requires workers to be very thorough and concrete hardeners speedy as well. A truck will make various stops around the perimeter of the form to pour concrete in various areas of the foundation.

After the concrete has been poured and distributed, it will be let to set for a set amount of time. After this is completed, the concrete will generally be finished to remove the rough spots or other problem areas from the surface of the foundation. Shoring is also done at this point to provide the foundation with extra support during the construction phase.

While laying a foundation can seem like a complicated process for professionals who handle this type of work on a routine basis it is something th