Swimming Pools Toronto

Swimming Pools - Common Problems and Solutions

In this blog post, we will look at different parts used in swimming pools of Toronto and problems and solutions associated with them.

Air Relief Valve (aka Air Bleeder): used on top of the filter, this device can be used to allow the air escape and permit the tank to fill with water. It’s essential before restarting the motor to open the air bleeder. The atmosphere can be compressed by the force of the water and cause excessive pressure which could damage the equipment.

Air Relief Valve Common Problems & Solutions:

Difficulty: The atmosphere valve won’t open.

Alternative: The unit must be disassembled with tools and lubricated.

Issue: Water keeps squirting out when closed.

Remedy: The rubber seal ring on the interior of the unit needs replacing and is damaged or missing.

Problem: The valve is opening and nothing comes out.

Solution: The passage is clogged with debris and must be disassembled and unclogged.

Common Issues & Options Related to Backwash:

Problem: The water flow (flow rate) didn’t grow following the backwash, and also the tank’s pressure is still more than customary.

Option: Be sure that the hair and lint strainer is definitely cleaned before backwashing.

Difficulty: No water is coming from the conduit.

Remedy: The pump should be primed.

Cartridge: the part in a filter, covered with pleats of cloth, to strain debris and contaminants from the water passing through it.

Common Problems & Answers:

Problem: The filter fabric allows filthy water to pass through, and tears.

Solution: The damaged filter needs replacement.

Caulking: stuff used to produce a waterproof seal for swimming pools in Toronto.

Common Problems & Solutions:

Issue: This permit water to seep to the joint.

Solution: Clean joint, remove old caulk, tape both sides of joint, pull on tape, strike to smooth finish and use caulk compound. Correct any imperfections having a release agent and permit to dry.

Centrifugal Force: the departing force created by an object in circular motion. The force that is developed by water pumps to transfer water.