Luis Roberto Barraza Lechuga
Mechatronics Engineer in Chihuahua, Mexico.
Hi, I’m Luis Roberto. I’m a Mechatronics Engineer living in Chihuahua, Mexico. I am a fan of technology, programming, and education. I’m also interested in innovation and web development. You can read my blog with a click on the button above.
Projects
UNIVERSAL BUS-CAN TABLET. Company: Vectra. Buzancais, France.
Creation of an electric card, which records the distance travelled by the car via the BUS-CAN communication located in the car, programmed in C.
TESTER HIPOT
Company: Jabil. Chihuahua, Mexico.
Realization of a test equipment which supplied voltage with a voltage source connected in serial, realization of the sequence in C. For the purpose of detecting a voltage drop in the PCB suggesting that it has problems inside its coils.
HARLEY DAVIDSON PCB & EMC SHIELD ASSEMBLY STATION. Company: ENICEM. Chihuahua, Mexico.
It is a test equipment designed for the placement of thermal in certain areas of the PCB as indicated in the Layout and once dispensed proceed to place a shield, During the whole process, the placement of the thermal material is inspected by means of vision sensors and a Viscotec system is used for dispensing it, all controlled by Test Stand.
Ford U625 SDM13 Automatic Gaskets Assembly Station. Company: ENICEM. Chihuahua, Mexico.
The Ford U625 SDM13 Automatic Gaskets Assembly Station is a device designed for the automatic placement of all four gaskets on the SDM13 display of the U625 project.
The equipment consists of a nest where the product is placed, it enters the work area where a pair of robots are in charge of gluing four gaskets on the edges of the product. The product then leaves the working area, and the presence and correct position of the gaskets is checked by a vision inspection. All this test sequence developed in Test Stand.
Lancer Controller Prog and Reprog interchange Nest. Company: ENICEM. Chihuahua, Mexico.
The "Programming and reprogramming Nest for Lancer Controller" are nests designed to be mounted in "Universal Fixtures for Programming and reprogramming" are independent nests,
suitable for running the Resideo Lancer project product. For this project I only did the development of the equipment (Hardware), while software development was the responsibility of client.